Merchandise Description

Product Description

WLW Sequence Oil-cost-free Vacuum Pump 

Overview
Reciprocating vertical oilless vacuum pump (also referred to as piston vacuum pump) is 1 of the minimal-vacuum getting equipment. Its final stress is generally inside 1330~2660PA, and the pumping charge assortment is wider that is from 50L/S to 600L/S. 

Reciprocating vacuum pump is relevant to the vacuum impregnation, vacuum therapy of molten steel, vacuum distillation, vacuum evaporation, vacuum focus, vacuum crystallization, vacuum drying, vacuum filtration in petroleum, chemical industry, medicine, foods, mild business, metallurgy, electric powered and other industries, as well as pumping gases for the vacuum therapy of concrete and other areas, but both not relevant pump the gases which have extreme oxygen material, toxic and explosive attribute, corrosive effects to metals, and dust particles, nor act as a transfer pump to transfer gas kind 1 container to an additional.

Features 
(1) Little energy intake and substantial strength-saving influence
(2) Tiny flooring area and low functioning noise
(3) Cylinder adopts pressured drinking water cooling with good cooling impact
(4) Undertake advanced sealing structure to set an finish to oil splash
(5) Because of to the rational framework and uniform tension of each and every moving component, the provider life is prolonged.

Applications 
WLW vertical oil-totally free (corrosion-resistant) reciprocating vacuum pump is the upgraded item to change W horizontal vacuum pump, and the principal equipment to receive rough vacuum. As adopt the entire sealing system, it realizes the total isolation of the crankcase from the cylinder In addition, self-lubricating supplies are utilized for piston ring to accomplish the superior oil-totally free lubrication.

Given that no sewage is discharged, this sort of vacuum pump is particularly appropriate for the vacuum distillation, vacuum evaporation, vacuum drying, vacuum focus, vacuum impregnation, and other procedures in chemical, medicine, food and other industries.

Solution Parameters

Product Features

WLW-50

WLW-70

WLW-one hundred

WLW-150

WLW-200

WLW-300

WLW-600

(≤ Pa)

Final Pressure

2000

2000

2000

2000

2000

2000

2000

(L/S)

Pumping Velocity

fifty

70

100

a hundred and fifty

200

300

600

Motor

 

Product

Y132M1-6

Y132M2-6

Y160M-6

Y160L-six

Y180L-6

Y200L2-6

Y280S-6

(kw)

Electrical power

4

five.five

7.five

eleven

fifteen

22

forty five

(rpm)

Rotational Velocity

270

380

350

210

280

250

240

(mm)

Inlet Diameter

Φ fifty

Φ 50

Φ 95

Φ 125

Φ a hundred twenty five

Φ 160

Φ 245

(mm)

Outlet Diameter

Φ fifty

Φ 50

Φ ninety five

Φ a hundred twenty five

Φ a hundred twenty five

Φ a hundred and sixty

Φ 245

(mm)

Diameter

Φ fifteen

Φ fifteen

Φ 15

Φ 15

Φ fifteen

Φ fifteen

Φ 15

(mm)

Diameter

Φ fifteen

Φ 15

Φ 15

Φ fifteen

Φ 15

Φ 15

Φ 15

(Levels C)

Temperature Increase

≤ forty

≤ 40

≤ 40

≤ forty

≤ forty

≤ 40

≤ 40

(A)

LW Sounds

≤ 70

≤ 75

≤ seventy five

≤ 78

≤ 80

≤ eighty

≤ 80

(Kg)

Bodyweight

500

520

seven hundred

900

1000

1500

3100

Comprehensive Photos

 

Packaging & Shipping

Packing Details  : A single pump in A single plywood circumstance
Delivery Information : 30 times soon after order confirmation

Common bundle with out authentic wood, no fumigation needed.

 

Company Profile

ZheZheJiang oto Pump Industrial Co., Ltd. is a professional pump manufacturer integrating R&D, manufacturing, income and support as a whole, which has been accredited by ISO9001 global top quality management system. 

Positioned in Xihu (West Lake) Dis.a Industrial Park, ZheJiang , Suoto Pump Industrial possesses 2 producing bases in ZheJiang and ZHangZhoug. Because our inception, Suoto Pump Industrial has been committed to the innovation and advancement of a variety of pumps. Our top merchandise contain self-priming trash pump, centrifugal pump, submersible pump, diaphragm pump, vacuum pump, diesel pump, hearth pump, and so on.

 

FAQ

Q: Can I chat with you on the internet? What is your business official internet site?
 

Q: What kind of company SUOTO is? 
A: SUOTO is a manufacture and trading company, has factories in ZheJiang and ZHangZhoug, with export and import license.

Q: What varieties of pumps do you source?
A: Our goods including self-priming trash pump, centrifugal pump, diaphragm pump, submersible pump, chemical pump, oil pump, diesel pump, hearth battling pump, etc.

Q: What is your payment phrases?
A: Alibaba Trade Assurance, Western Union, Paypal, T/T, L/C, and so on.

Q: Can you give OEM, ODM service?
A: Indeed. We have factories in ZheJiang and ZHangZhoug, we can make items in accordance to your specifications.

Q: Why must we buy from you?
A: We are committed to give ideal top quality goods at minimal shipping and delivery time and aggressive price. We think this is what consumer desires. We are satified till consumers are.

Q: What is your warranty period of time?
A: We give 1 calendar year of unconditional warranty on our merchandise for the production problems.

Q: What about delivery time?
A: Usually our creation time is inside of 2 months. Remember to affirm prior to buy.

US $150
/ Piece
|
1 Piece

(Min. Order)

###

After-sales Service: 1 Year
Warranty: 1 Year
Oil or Not: Oil Free
Structure: Jet Flow Vacuum Pump
Exhauster Method: Positive Displacement Pump
Vacuum Degree: High Vacuum

###

Samples:
US$ 150/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Model Functions
WLW-50
WLW-70
WLW-100
WLW-150
WLW-200
WLW-300
WLW-600
(≤ Pa)
Ultimate Pressure
2000
2000
2000
2000
2000
2000
2000
(L/S)
Pumping Speed
50
70
100
150
200
300
600
Motor
 
Model
Y132M1-6
Y132M2-6
Y160M-6
Y160L-6
Y180L-6
Y200L2-6
Y280S-6
(kw)
Power
4
5.5
7.5
11
15
22
45
(rpm)
Rotational Speed
270
380
350
210
280
250
240
(mm)
Inlet Diameter
Φ 50
Φ 50
Φ 95
Φ 125
Φ 125
Φ 160
Φ 245
(mm)
Outlet Diameter
Φ 50
Φ 50
Φ 95
Φ 125
Φ 125
Φ 160
Φ 245
(mm)
Diameter
Φ 15
Φ 15
Φ 15
Φ 15
Φ 15
Φ 15
Φ 15
(mm)
Diameter
Φ 15
Φ 15
Φ 15
Φ 15
Φ 15
Φ 15
Φ 15
(Degrees C)
Temperature Rise
≤ 40
≤ 40
≤ 40
≤ 40
≤ 40
≤ 40
≤ 40
(A)
LW Noise
≤ 70
≤ 75
≤ 75
≤ 78
≤ 80
≤ 80
≤ 80
(Kg)
Weight
500
520
700
900
1000
1500
3100
US $150
/ Piece
|
1 Piece

(Min. Order)

###

After-sales Service: 1 Year
Warranty: 1 Year
Oil or Not: Oil Free
Structure: Jet Flow Vacuum Pump
Exhauster Method: Positive Displacement Pump
Vacuum Degree: High Vacuum

###

Samples:
US$ 150/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Model Functions
WLW-50
WLW-70
WLW-100
WLW-150
WLW-200
WLW-300
WLW-600
(≤ Pa)
Ultimate Pressure
2000
2000
2000
2000
2000
2000
2000
(L/S)
Pumping Speed
50
70
100
150
200
300
600
Motor
 
Model
Y132M1-6
Y132M2-6
Y160M-6
Y160L-6
Y180L-6
Y200L2-6
Y280S-6
(kw)
Power
4
5.5
7.5
11
15
22
45
(rpm)
Rotational Speed
270
380
350
210
280
250
240
(mm)
Inlet Diameter
Φ 50
Φ 50
Φ 95
Φ 125
Φ 125
Φ 160
Φ 245
(mm)
Outlet Diameter
Φ 50
Φ 50
Φ 95
Φ 125
Φ 125
Φ 160
Φ 245
(mm)
Diameter
Φ 15
Φ 15
Φ 15
Φ 15
Φ 15
Φ 15
Φ 15
(mm)
Diameter
Φ 15
Φ 15
Φ 15
Φ 15
Φ 15
Φ 15
Φ 15
(Degrees C)
Temperature Rise
≤ 40
≤ 40
≤ 40
≤ 40
≤ 40
≤ 40
≤ 40
(A)
LW Noise
≤ 70
≤ 75
≤ 75
≤ 78
≤ 80
≤ 80
≤ 80
(Kg)
Weight
500
520
700
900
1000
1500
3100

What makes pulleys so important?

A pulley is a simple tool that makes it easy to lift or move heavy objects. There are many uses for this tool, but let’s take a look at their mechanical advantages. There are several types and many applications, along with their benefits and costs. So what makes them so important? Read on to find out! Below are some of the most common uses for pulleys. Let’s dive into them.
pulley

Mechanical advantage

If you’ve ever used rope and pulley systems, you’ve probably noticed their usefulness. A 3:1 mechanical advantage system is like a 300-pound load being moved one foot up by three feet of rope. Then you can imagine using the same rope to get into a small space. The same principle applies to limited spaces, and a simple mechanical advantage system is just what you need for this purpose.
Assuming frictionless bearings, a single movable pulley can have two mechanical advantages. It is attached to a heavy object and requires the pulling force exerted by the jack to lift the heavy object. However, when you use a compound pulley, the force exerted on the rope to lift the object changes direction. The three factors used to measure machine efficiency are force, distance, and relative motion.
The mechanical advantage of the pulley is that it reduces the effort required to lift weights. When the rope is attached to the two wheels, applying a force of 500 Newtons can lift a mass of 100 kg. This mechanical advantage is why two rings in a pulley are better than one. Therefore, using a pulley system will save you energy. You can also use branches instead of ropes and pulleys.

type

There are several different types of pulleys. They can be simple or complex, depending on how they are connected. Simple pulleys have a grooved wheel on one end and are attached to an axle. These pulleys are used to lift heavy objects. They are often found on sailboats, and you can even see them on construction sites. On the other hand, stationary pulleys are attached to stationary structures, such as flagpoles. Fixed pulleys can also be used to lift loads from trucks or trains. Pulleys are also commonly used in wells.
Fixed pulley systems use rollers or single wheels. These pulleys are usually made of nylon or wire rope. They are used in heavy duty applications. They are also used in electric motors. A “V” pulley requires a “V” belt to transmit power. Some of these pulleys have multiple “V” grooves to reduce the risk of power slipping. Once installed, fixed pulleys are suitable for many applications.
Simple pulleys are simple pulleys. It has a pulley mounted on an axle and a rope at one end. Rope can be used to pull objects, while plastic pulleys can carry lighter loads. There are two main types: heavy duty and simple pulley systems. In either case, their function is the same: they change the direction in which the seat belt is fastened. So when comparing the two, it’s easy to decide which one is best for you.
pulley

application

Pulley systems are simple machines used for a variety of industrial and mechanical tasks. Its design parameters and benefits have improved over the years, but they remain essential for many applications. Let’s take a look at some of the most common applications of pulleys. The applications for pulley systems are endless, from construction to mining, from transportation to packaging. Read on to learn more!
Pulley systems are often used to lift large objects, such as blocks, that might otherwise be too heavy to lift. It also makes the exploration process easier by helping people pull heavy objects into place. It is also widely used on sailing ships. Due to its low cost of use and no need for lubrication, it is a practical choice for many applications. It can be used to lift heavy objects and support long ropes.
The pulley system allows you to change the force required to move the object. For example, a two-wheel pulley system is especially useful for reducing the effort required to lift large objects. The mechanical advantage increases with the number of wheels in the system. In addition, the mechanical advantage of a two-wheel pulley system depends on the ratio of the load weight to the number of rope segments in the system.

cost

In most cases, an idler replacement will cost around $150, but the exact cost will depend on several factors, including the make and model of the car. The cost also depends on the type of idler you need and the cost of the OEM parts. Some pulleys are easy to replace at home, while others require specialized tools, such as pulley wrenches. The chart below shows the cost of popular vehicles. Prices are valid at the time of writing.
The diameter of the pulley is also important, this should be about 60% of the diameter of the active pulley. You can also purchase compensating pulleys at factory prices. Be sure to select the correct size before placing the pulley on the machine. Also, make sure you have enough space for the pulleys. Once you have the desired pulley size, you can determine the best type of belt to install.
While this method is the most common type of belt drive, there are other methods of spinning cup blanks directly from a flat metal disk. One such method is described in US Patent No. 5,500,31. US Patent No. 1,728,002 and shows a method of making a dynamically balanced V-groove pulley. Using a headstock die with sliders increases the cost of the pulley. In addition, different cup blanks require different molds.

lubricating

The lubrication of pulley bearings is relatively simple. The pulley itself rotates smoothly with little vibration. Bearing contact loads are relatively low, and well-lubricated pulleys operate near ambient temperatures. Here are some tips for properly lubricating pulley bearings. Make sure to lubricate the nozzle before applying grease.
Check grease, elastic ring, pulley bearing clearance once a year. If the elastic ring of the pulley is damaged or the roller bearing on the associated pulley is damaged, replace the pulley. Also, check the running noise of the pulleys to see if they are making noise. Check the bearing, damage to the elastic ring may indicate bearing failure or roller failure.
Proper lubrication is critical to the life of the rotating pinion. Avoid exposure to sunlight or water. Protects the pinion meshing area from hard impurities. Liaise with crane operators and lubricators during maintenance and lubrication operations. They should know how to avoid pitfalls in the lubrication process. In case of malfunction, please contact service personnel and take necessary measures.
pulley

Compound Pulley System

A compound pulley system is used to lift heavy objects. These systems can use ropes or cords of different sizes. In general, the total weight of all ropes must be less than the weight of a single rope. The system can be used in large areas, but may not be suitable for smaller spaces. To learn more about compound pulleys, read on! Here are some helpful tips. 1. Understand the difference between single wheel and compound wheel
A composite pulley system consists of three components: a drive pulley, one or more driven pulleys, and two pulleys. The drive wheels are usually connected to shafts that are connected to the engine or transmission. The driven wheel is a separate unit mounted on the same shaft as the drive wheel. A compound pulley system helps lift heavy loads. These pulleys are the most common type of pulley system in use today.
Composite pulley systems are widely used on construction sites. They save energy by spreading the weight of heavy loads over multiple smaller loads. This means that the elevator does not have to use high-capacity lifting equipment. Additionally, the compound pulley system allows users to easily adjust power distribution to meet their individual needs. They can also use more than two ropes if necessary. This increases the range of motion of the lift arm.

China Vertical Oil-Free Reciprocating Sublimation Diaphragm Pump Used in Lab     with Hot selling	China Vertical Oil-Free Reciprocating Sublimation Diaphragm Pump Used in Lab     with Hot selling
editor by czh 2022-11-25